2010
Table Of Contents
- Contents
- Part 1 Tubes and Pipes
- 1 Get Started with Tube & Pipe
- 2 Route Basics
- 3 Set Styles
- 4 Create Rigid Routes and Runs
- Workflow for Rigid Routes
- Create Auto Route Regions
- Manually Create Parametric Regions
- Automatically Dimension Route Sketches
- Create Segments With Precise Values
- Define Parallel and Perpendicular Segments
- Snap Route Points to Existing Geometry
- Place Constraints On Route Sketches
- Create Bends Between Existing Pipe Segments
- Create Pipe Routes With Custom Bends
- Create Bent Tube Routes
- Realign 3D Orthogonal Route Tool
- Control Dimension Visibility
- Populated Routes
- 5 Create and Edit Flexible Hose Routes
- 6 Edit Rigid Routes and Runs
- 7 Use Content Center Libraries
- 8 Author and Publish
- 9 Document Routes and Runs
- Part 2 Cable and Harness
- 10 Get Started with Cable and Harness
- 11 Work With Harness Assemblies
- 12 Use the Cable and Harness Library
- 13 Work with Wires and Cables
- 14 Work with Segments
- 15 Route Wires and Cables
- 16 Work with Splices
- 17 Work with Ribbon Cables
- 18 Generate Reports
- 19 Work With Nailboards and Drawings
- Part 3 IDF Translator
- Index
Each time you open the Cable and Harness Library, the system determines if
changes were made to the library data that require an update. If updates are
required, the changes are immediately available in the active harness assembly.
In this exercise, you access and view the name and location for the current
cable and harness library file.
View the location of the Cable&HarnessDefaultLibrary.iwl file
1 In the browser, double-click Harness Assembly1, if not already active.
2 In the browser, right-click Harness Assembly1, and then select Harness
Settings from the context menu.
3 On the Harness Settings dialog box, click the File Locations tab.
This harness assembly references the default cable and harness library
file as set for the Design Data of the project. The default file and location
is:
Microsoft
®
Windows
®
XP operating system:
■ Program Files\Autodesk\Inventor <version>\Design Data\Cable &
Harness\Cable&HarnessDefaultLibrary.iwl
Windows Vista
®
operating system:
■ Users\Public\Documents\Autodesk\Inventor <version>\Design Data\Cable
& Harness\Cable&HarnessDefaultLibrary.iwl
Locate the Cable and Harness Library File | 237