2010
Table Of Contents
- Contents
- Part 1 Tubes and Pipes
- 1 Get Started with Tube & Pipe
- 2 Route Basics
- 3 Set Styles
- 4 Create Rigid Routes and Runs
- Workflow for Rigid Routes
- Create Auto Route Regions
- Manually Create Parametric Regions
- Automatically Dimension Route Sketches
- Create Segments With Precise Values
- Define Parallel and Perpendicular Segments
- Snap Route Points to Existing Geometry
- Place Constraints On Route Sketches
- Create Bends Between Existing Pipe Segments
- Create Pipe Routes With Custom Bends
- Create Bent Tube Routes
- Realign 3D Orthogonal Route Tool
- Control Dimension Visibility
- Populated Routes
- 5 Create and Edit Flexible Hose Routes
- 6 Edit Rigid Routes and Runs
- 7 Use Content Center Libraries
- 8 Author and Publish
- 9 Document Routes and Runs
- Part 2 Cable and Harness
- 10 Get Started with Cable and Harness
- 11 Work With Harness Assemblies
- 12 Use the Cable and Harness Library
- 13 Work with Wires and Cables
- 14 Work with Segments
- 15 Route Wires and Cables
- 16 Work with Splices
- 17 Work with Ribbon Cables
- 18 Generate Reports
- 19 Work With Nailboards and Drawings
- Part 3 IDF Translator
- Index
tab. It does not affect features or parts. You can add
general dimensions, baseline dimensions, ordinate di-
mensions, and so on.
The following image shows the Annotate tab on which you can use tools to
add dimensions. Pause the cursor over the images to view the tooltip.
Dimension tools include:
■ General Dimension
■ Baseline Dimension Set
■ Baseline Dimension
■ Ordinate Dimension Set
■ Ordinate Dimension
In the following exercises, you learn to add general dimensions in the detail
view DETAIL A. For more information on dimensioning, refer to the Help.
Add general drawing dimensions
1 In the AirSystemAssy.idw drawing document, click the Annotate tab.
2
On the ribbon, click Annotate tab ➤ Dimension panel ➤
Dimension.
3 Click the intersection point of two route centerlines and the point on
the valve as shown in the following images, and then drag to set the
dimension.
Dimension Drawing Views | 197