2010
Table Of Contents
- Contents
- Part 1 Tubes and Pipes
- 1 Get Started with Tube & Pipe
- 2 Route Basics
- 3 Set Styles
- 4 Create Rigid Routes and Runs
- Workflow for Rigid Routes
- Create Auto Route Regions
- Manually Create Parametric Regions
- Automatically Dimension Route Sketches
- Create Segments With Precise Values
- Define Parallel and Perpendicular Segments
- Snap Route Points to Existing Geometry
- Place Constraints On Route Sketches
- Create Bends Between Existing Pipe Segments
- Create Pipe Routes With Custom Bends
- Create Bent Tube Routes
- Realign 3D Orthogonal Route Tool
- Control Dimension Visibility
- Populated Routes
- 5 Create and Edit Flexible Hose Routes
- 6 Edit Rigid Routes and Runs
- 7 Use Content Center Libraries
- 8 Author and Publish
- 9 Document Routes and Runs
- Part 2 Cable and Harness
- 10 Get Started with Cable and Harness
- 11 Work With Harness Assemblies
- 12 Use the Cable and Harness Library
- 13 Work with Wires and Cables
- 14 Work with Segments
- 15 Route Wires and Cables
- 16 Work with Splices
- 17 Work with Ribbon Cables
- 18 Generate Reports
- 19 Work With Nailboards and Drawings
- Part 3 IDF Translator
- Index
2 Press CTRL or SHIFT to select all predefined work points and work axes in
the browser, right-click and select Visibility.
Click the browser icon to highlight the corresponding work point or work
axis in the graphics window.
3 On the ribbon, click Manage tab ➤ Author panel ➤ Tube and Pipe.
4 On the Tube & Pipe Authoring dialog box, specify:
Type: Elbows
Connections: 2
5 Click connection number button 1.
6 Set the following:
End Treatment: Welded
Parameter and Table Mapping: Nominal Size: NPS
Connection Point and Connection Axis: See the following images
Connection: Female
Engagement
Max: Distance: 0 inch
Min % of Max: 0
Author iParts | 171