2010
Table Of Contents
- Contents
- Part 1 Tubes and Pipes
- 1 Get Started with Tube & Pipe
- 2 Route Basics
- 3 Set Styles
- 4 Create Rigid Routes and Runs
- Workflow for Rigid Routes
- Create Auto Route Regions
- Manually Create Parametric Regions
- Automatically Dimension Route Sketches
- Create Segments With Precise Values
- Define Parallel and Perpendicular Segments
- Snap Route Points to Existing Geometry
- Place Constraints On Route Sketches
- Create Bends Between Existing Pipe Segments
- Create Pipe Routes With Custom Bends
- Create Bent Tube Routes
- Realign 3D Orthogonal Route Tool
- Control Dimension Visibility
- Populated Routes
- 5 Create and Edit Flexible Hose Routes
- 6 Edit Rigid Routes and Runs
- 7 Use Content Center Libraries
- 8 Author and Publish
- 9 Document Routes and Runs
- Part 2 Cable and Harness
- 10 Get Started with Cable and Harness
- 11 Work With Harness Assemblies
- 12 Use the Cable and Harness Library
- 13 Work with Wires and Cables
- 14 Work with Segments
- 15 Route Wires and Cables
- 16 Work with Splices
- 17 Work with Ribbon Cables
- 18 Generate Reports
- 19 Work With Nailboards and Drawings
- Part 3 IDF Translator
- Index
This removes the library from the server, but does not permanently delete
it.
Export a library
1 In the Vault server Console navigation pane, expand the appropriate
server.
2 Expand the Libraries folder.
3 Right-click a library in the list and select Export.
Delete a library permanently
1 In the Vault server Console navigation pane, expand the appropriate
server.
2 Expand the Libraries folder.
3 Right-click a library in the list and select Delete.
4 Click OK.
Configure Libraries
To configure Content Center Libraries for use in a project, open Autodesk
Inventor Routed Systems and click
➤ Manage ➤ Projects.
Using the Configure Content Center Libraries tool you can:
■ Add new libraries.
■ Import Inventor libraries and the Tube & Pipe Library from previous
versions.
■ Edit or remove existing custom libraries in the Libraries list.
■ Update the libraries in the list.
152 | Chapter 7 Use Content Center Libraries