2009
Table Of Contents
- Contents
- Tubes and Pipes
- 1 Getting Started with Tube & Pipe
- 2 Route Basics
- 3 Setting Styles
- 4 Creating Rigid Routes and Runs
- General Workflow for Rigid Routes
- Creating Auto Route Regions
- Manually Creating Parametric Regions
- Automatically Dimension Route Sketches
- Create Segments With Precise Values
- Define Parallel and Perpendicular Segments
- Snap Route Points to Existing Geometry
- Place Constraints On Route Sketches
- Create Bends Between Existing Pipe Segments
- Create Pipe Routes With Custom Bends
- Create Bent Tube Routes
- Realign 3D Orthogonal Route Tool
- Control Dimension Visibility
- Populated Routes
- 5 Creating and Editing Flexible Hose Routes
- 6 Editing Rigid Routes and Runs
- 7 Using Content Center Libraries
- 8 Authoring and Publishing
- 9 Documenting Routes and Runs
- Cable and Harness
- 10 Getting Started with Cable and Harness
- 11 Working With Harness Assemblies
- 12 Using the Cable and Harness Library
- 13 Working with Wires and Cables
- About Wires and Cables
- Setting Modeling and Curvature Behavior
- Inserting Wires and Cables Manually
- Moving Wires and Cables
- Deleting Wires and Cables
- Replacing Wires
- Assigning Virtual Parts
- Importing Harness Data
- Adding Shape to Wires and Cable Wires
- Setting Occurrence Properties
- Changing Wire and Cable Displays
- 14 Working with Segments
- 15 Routing Wires and Cables
- 16 Working with Splices
- 17 Working with Ribbon Cables
- 18 Generating Reports
- 19 Working Nailboards and Drawings
- IDF Translator
- Index
Detach a library
1 In the ADMS Console navigation pane, expand the appropriate server.
2 Expand the Libraries folder.
3 Right-click a library in the list and select Detach.
This removes the library from the server, but does not permanently delete
it.
Export a library
1 In the ADMS Console navigation pane, expand the appropriate server.
2 Expand the Libraries folder.
3 Right-click a library in the list and select Export.
Delete a library permanently
1 In the ADMS Console navigation pane, expand the appropriate server.
2 Expand the Libraries folder.
3 Right-click a library in the list and select Delete.
4 Click OK.
Configuring Libraries
To configure Content Center Libraries for use in a project, open Autodesk
Inventor Routed Systems and click File ➤ Projects on the standard toolbar.
Using the Configure Content Center Libraries tool you can:
■ Add new libraries.
■ Import Inventor libraries and the Tube & Pipe Library from previous
versions.
■ Edit or remove existing custom libraries in the Libraries list.
■ Update the libraries in the list.
150 | Chapter 7 Using Content Center Libraries