Manualshelf

Setup guide

ManualsBrandsAutodesk ManualsComputer equipmentHP Z800
12345678910
5
1. Connect the output of the sync generator to the top Ref Loop port of the AJA K3G-Box.
2. Connect the Input port of the NVIDIA SDI card (the one next to the DVI port) to the bottom Ref
Loop port of the AJA K3G-Box.
3. Connect the Fill (outer) port of the NVIDIA SDI card to the Input port of the AJA HD5DA
distribution amplifier.
4. Connect one of the OUT ports of the distribution amplifier to an SDI IN port of the broadcast
monitor.
5. For RTD or Stereo, connect another OUT port of the amplifier to the Link A input port of the
VTR.
6. For Stereo or RTD, connect the Key (middle) SDI port of the NVIDIA SDI card to the Link B input
port of the RTD VTR.
7. Connect the RS-422 port of the AJA K3G-Box to the VTR control port.