Setup guide

3
1. Use the short DVI cable to connect the DVI port of the NVIDIA Quadro graphics card in slot 2 to
the DVI port of the NVIDIA Quadro SDI adapter in slot 6.
2. Connect the Display Port extender to the display port 1 (the outer port) of the NVIDIA Quadro
graphics card and to the display port of the EIZO CG245 monitor.
Note: If you are using an older EIZO monitor, such as the CG241, connect the DP port of the
NVIDIA Quadro graphics card to the Avenview FO-DVI-25MM DVI extender of the monitor using
the DP to DVI adapter included with the workstation.