2015

File > ImportAutodesk Opticore Studio
Application Menu > Import > Select File
to Import dialog
3ds Max/3dsMax Design
2 In the browser, select a native IGES V5.3 (*.iges or *.igs) file.
3 Click OK, or Open to launch the translator and import the file into the
scene.
Export IGES files
1 In your Autodesk software, choose File > Save As, or File > Export >
Active As
.
2 On the File Formats menu, click DWG or DXF. For details about the
available options, see the Help in the Autodesk software.
3 Save to a native IGES V5.3(*.iges or *.igs) file.
Troubleshoot (Autodesk Alias)
If the files you import contain unsatisfactory data, change the following import
options in Autodesk Alias:
Default Trim Curves
Specifies the trim curves that the processor uses. You can select parameter
space curves, model space curves, or use the flag that is present in the IGES
file. By default, the preference flag in the IGES files is used.
Shrink Surface
When turned ON, Alias detects trimmed surfaces with trim boundaries that
are the same as, or isoparametric to, the natural boundaries of the untrimmed
surface. It then converts these surfaces into Alias surfaces by shrinking the
untrimmed surface to the trim boundaries.
When turned OFF, Alias converts all trimmed surfaces of this type to Alias
trimmed surfaces.
22 | Chapter 4 Translator Details