Technical data

Chapter 4 Creating Plan Details
60
To design cul-de-sacs
Steps
Use
to look up
1 Draw the roadway centerline alignments for the
cul-de-sacs by selecting commands from the
AutoCAD Land Development Desktop
Lines/Curves menu.
Or, you can draw the roadway centerlines
using polylines.
Overview of Lines
and Curves.
2 If you drew the alignments with lines and curves,
then from the Alignments menu, choose Define
From Objects to define the roadway alignments.
If you drew the alignments using polylines, then
from the Alignments menu, choose Define From
Polyline to define the alignments.
Define an Alignment
from Objects
3 From the Alignments menu, choose Create
Offsets to create offsets for the alignments.
4 From the Layout menu, choose
Cul-De-Sacs ➤ Settings to set the cul-de-sac
settings. These settings control radii, offset
widths, and offset layers.
Change the Cul-de-sac
Settings
5 Create the cul-de-sac by selecting one of
the Cul-de-sac commands from the
Layout ➤ Cul-De-Sacs menu.
Overview of Creating
Cul-de-sacs