Technical data

Creating Cul-de-Sacs

Autodesk Civil Design has a set of commands that you can use to

design five different types of cul-de-sacs: tangent, curved,

hammerhead, elbow, and teardrop. The following illustration shows a

cul-de-sac drawn off a curved roadway.

Key Concepts

■

You should use continuous line types when you are adding a cul-

de-sac to an alignment.

■

All cul-de-sac commands treat a single offset as the outer offset.

■

The offset widths that you specify in the Cul-de-sac Settings dialog

box must match the widths of the alignment offsets that are drawn

in the drawing.