Technical data

Chapter 2 Designing Finished Ground Sites

To create a grading object using the Grading Wizard

Steps

Use

to look up

1 From the Grading menu, choose Slope

Grading ➤ Grading Wizard. Use the Next and

Back buttons to move through the sheets.

Create a Grading Object

using the Grading Wizard

2 On the Footprint sheet, enter a Grading Scheme

Name and Description for the footprint. Select

Inside or Outside (or Right or Left if the footprint is

open) for the direction you want to grade from the

footprint. Change the Base Elevation of the footprint

and edit vertex elevations, if necessary.

Configure the Grading

Footprint Settings

3 On the Targets sheet, select the target you want to

grade to, a surface, an elevation, or a distance. You

can add and delete target regions, if necessary.

Configure the Grading

Targets Settings

4 On the Slopes sheet, enter the Cut Slope and

Fill Slope. You can add and delete slope tags and

edit stations.

Configure the Grading

Slopes Settings