Technical data

Creating a Section Sheet Series
113
To create a plan/profile sheet series (continued)
Steps
Use
to look up
10 You can view one sheet at a time by loading it
into paper space. From the Sheet Manager
menu, choose Plan/Profile Sheets ➤ Load
Sheet - Individual.
You can only have one sheet loaded into a layout at
a time. If you load another sheet, the first sheet will
be removed from the layout.
The Sheet Manager ➤ Plan/Profile ➤ Load Sheet –
Series command can load up to 255 sheets per
drawing. Each sheet is loaded into its own layout.
Load a Generated
Plan/Profile Sheet
Load a Plan/Profile Sheet
Series
11 From the Sheet Manager menu, choose
Plot ➤ Edit Batch Plot Job to select a group of
sheets to plot.
Batch Plot Sheets
12 From the Sheet Manager menu, choose
Plot ➤ Run Batch Plot Job to plot the sheets.
Run a Batch Plot Job
Creating a Section Sheet Series
To create a section sheet series, you use frames to display sections on
the sheet instead of viewports. Because there are no viewports on a
section sheet style, you do not lay out the sheet series like you do with
a plan/profile series.
Key Concepts
■
A section sheet style must have one Section/View frame and one
Section/Section frame. A section sheet style can have any number
of label and table frames.
■
The easiest way to start generating section sheets is to use a
predefined section sheet style. There are predefined sheet styles
that you can use in the \data\sheets directory. For example, in
\data\sheets\metric there is a cross section sheet named
xs100m.dwg that you can use.