Technical data

Chapter 7 Designing Pipe Runs
98
Working with the Pipes Run Editor
You can use the Pipes Run Editor to edit a conceptual pipe run in a
dynamic spreadsheet format dialog box. You can use this dialog box to
adjust pipe sizing and flow rate parameters of the pipe runs.
You can choose which columns of information that you want to
display in the Pipes Run Editor. You can select one of the defined
views from the View list to view specific column groupings. For
example, you can pick the Node view to view the columns that only
pertain to nodes.
Changes that you make in relevant cells of the spreadsheet affect data
in other parts of the spreadsheet. For example, increasing the flow rate
values in the Pipe Flow column results in increases in the values found
in the Pipe Size column, as well as changes to values in the Design
Flow, Design Velocity, and Design Depth columns.
Key Concepts
■
Pipe run nodes are listed by northing/easting coordinates, station
and offset (if applicable), and node labels.
■
Structures at nodes are listed with rim and sump elevations, node
and sump drop values, and structure type and dimensions,
including structure wall thickness values.