Technical data

Chapter 6 Creating Cadastral Information
218
To delete multiple alignments from the drawing (
continued
)
Steps
Use
to look up
3
Select one or more Delete Options. You can
delete the alignment from the screen, the
database, or both.
You can also delete any vertical files that are
associated with the alignment. These are the
alignment’s profile and cross section files that are
created with Autodesk Civil Design.
Delete Multiple Horizontal
Alignments
4
Click Delete to delete the selected alignments. A
confirmation dialog box is displayed. Click Yes to
confirm the deletion.
5
If you want to set an alignment current before
you close the Multiple Selections dialog box,
then select the alignment name you want to set
as current, and then click Select.
Drafting Road Results
You can complete the final drafting of the alignment for base map
creation by adding roadway offsets, roadway stationing, and station
and offset spot labels.
You may also want to use the AutoCAD Map commands to create a
network topology of the alignments. You can use these to calculate
the shortest paths to destinations, or show graphically the volumes of
traffic that travel along each alignment.
Key Concepts
■
All the annotation is based on the current alignment in the
database.
■
To station or create offsets for an alignment, the alignment must be
defined to the database.