Technical data

Chapter 6 Creating Cadastral Information
214
■
To release a lock on the current alignment, you can make a
different alignment current, or you can use the Close Database
command on the Alignments
➤
Alignment Commands menu to
close the database and release the lock.
To make an alignment current
Steps
Use
to look up
1
From the Alignments menu, choose Set
Current Alignment.
Your cursor turns into a pickbox.
Make an Alignment Current
2
Select the alignment using one of the following
methods:
If the alignment is drafted in the drawing, then
click the alignment with the pickbox.
3
Press ENTER when prompted to select an
alignment, and then select the alignment from
the Alignment Librarian.
Press ENTER when prompted to select an
alignment, click Cancel to close the Alignment
Librarian, and then type the number of the
alignment to make current.
Select the Current Alignment
from the Librarian Dialog Box