Technical data

Working with Basic AutoCAD Commands to Create Objects
151
To hatch an area (
continued
)
Steps
Use
to look up
2
In the Boundary Hatch dialog box, click the
pattern that is displayed in the Swatch box.
The Hatch Pattern Palette dialog box is displayed.
3
Select a pattern, and then click OK to return to
the Boundary Hatch dialog box.
Using Hatch Patterns
4
To hatch an enclosed area, click Pick Points. To
hatch objects, click Select Objects.
Hatching Areas
5
Specify a point inside a closed boundary, or select
an object.
6
In the Boundary Hatch dialog box, click Apply.
For more information, use to look up “Hatching Areas” in the
online Help.