2011

To cut, copy or paste one or more nodes:
1 Select the node(s) you want to cut or copy.
2 Then, do one of two things. To cut the node(s), right-click one of the
selected nodes and select Cut, or press Ctrl + X (for Windows and
Linux) or Cmd + X (for Mac OS). To copy the node(s), right-click one
of the selected nodes and select Copy, or press Ctrl + C (for Windows
and Linux) or Cmd + C (for Mac OS).
3 To paste the cut or copied node(s), right-click outside all nodes and select
Paste, or press Ctrl + V (for Windows and Linux) or Cmd + V (for
Mac OS).
To delete one or more nodes:
1 Select the node or nodes you want to delete.
2 Then, do one of the following. Either right-click one of the nodes and
select Delete, or press Delete. Or drag a reasonable distance outside the
bottom edge of the Schematic view and release. A garbage icon will appear
to indicate the point at which it is possible to release the node.
NOTE You can also delete nodes by selecting then and clicking the Delete button
in the Tool Options area of the tool.
70 | Chapter 3 Interface Fundamentals