2011

Table Of Contents
Quick Gain
The Quick Gain controls are used to set the Gain in three specific ways:
NOTE The main Gain value is applied after the other Gain fields, so changes to
main Gain do not change the separate channel Gain fields or the Quick Gain fields.
To:Modify:
Set gain using a scale from warm (-100) to cool (100), which results in
orange to cyan. It affects the Red and Blue Gain fields.
Temp
Set gain using a scale from green (-100) to magenta (100). It affects
the Red, Green, and Blue Gain fields.
M/G
Set gain using a scale from dark (0) to bright (200). It affects the Red,
Green, and Blue Gain fields.
Value
To modify the image using the Quick Gain controls:
Drag the field to set the gain. You may also type values into the field and
press Enter.
NOTE You can reset all fields simultaneously by clicking Reset in the Tool
Options area located on the right side of the UI.
Setting the Gamma
You can set the gray values of an image by setting the gamma to brighten or
darken an image without greatly affecting the shadows or highlights.
To set the gamma of the image:
1 Select the tonal range that you want to modify.
636 | Chapter 26 Color Correction