2011

To apply a 1D LUT to an image:
1 From the Tools tab, drag the 1D LUT tool from the Color Correction
folder to the dependency graph in the Schematic view.
2 In the 1D LUT tab, click the LUT Browser button. Locate the 1D LUT you
want to use and drag it to the dependency graph in the Schematic view.
3 Select the Input Depth.
4 Set the Exposure if required.
The 1D LUT is applied.
NOTE Exposure adjustment is an animatable attribute—see Setting Keys Manually
on page 676 and Validating and Applying the Expression String on page 729.
Modifying a 1D LUT
You can modify a 1D LUT by changing values in its ASCII file without having
to reset the 1D LUT field.
To modify a 1D LUT:
1 Open the ASCII file of the 1D LUT and make the necessary modifications.
2 Save the LUT.
3 Click Refresh.
The image is refreshed with the modified parameters.
NOTE If you want to modify a 1D LUT that is provided with the 1D LUT tool, save
the modified 1D LUT under a different file name to preserve the original LUT as
is.
622 | Chapter 26 Color Correction