2011

NOTE You can set the channels for the target in the fullscreen Player only if you
entered it through a Player view.
To set the channels for the target:
1 Do one of the following to display the Player options:
■ In the Player view or fullscreen Player, press the tilde key (~) or
middle-click and go through the south gate.
■ In the Player view or fullscreen Player, right-click to display the Player
menu.
2 In the Player options, select the Display tab or select View Mode in the
menu.
3 Set the channels for the target.
To display:Select:
All channels (RGBA, RGB, or A) contained in the target. For example,
if the target is the output of an RGBA composition, it displays RGBA
Chns: RGB
channels. If the target is the output of an RGB composition, it displays
RGB channels.
The red, green, and blue channels.RGB
The red, green, blue, and alpha channels.RGBA
The alpha channel.A
Any combination of RGBA channels. Enter the combination you want
as a four-character string in which you specify each channel either as
<user-
defined>
the channel letter (if you want to display it), or as a blank (if you do
not want to display it). Position is significant: the first position is R, the
second G, the third B, and the fourth A. For example if you wanted to
see only the blue and alpha channels, you would enter two spaces or
2 'Ns' followed by BA.
196 | Chapter 10 The Player