2011

NOTE You will always be in pick mode whenever the color picker is active. You
can only pick outside of the floating window. When inside the window the cursor
will return to the normal cursor for interaction with the UI controls.
Cursor in pick mode
To select a color for a color pot from the screen:
1 Ctrl + click the color pot for which you want to select a color.
2 Position the cursor over the color you want to select and click.
The color pot updates to the selected color.
To select a color for a color pot:
1 Click the color pot for which you want to select a color.
The Color Picker appears.
2 At the bottom center of the Color Picker UI, click the bit depth button
and select a color depth for the Color Picker. Select % to work with
percentage values (0.00% to 100.00%). The default is Float.
3 Do any of the following:
■ Use any of the color model areas to select a color.
■ Click anywhere on the screen to select a color.
■ Click any of the color pots on the right of the UI to select the color
in that pot.
4 Click the OK button. That color pot now contains the color you selected.
156 | Chapter 9 Getting Familiar with Your Workspace