2011

To select, delete, rename, set as default, or reset to a default preset:
1 Select the Edit Layout Presets and choose the New, Delete, Rename, Set
as Default, or Reset command.
2 If you chose the New or Rename command, enter a name for the
new/renamed preset and click OK or press Enter. If you chose the Delete
command, select Yes or No in the deletion confirmation dialog.
NOTE You can create up to 18 presets that will have hotkeys to access them. The
first nine will use the single number 1 through 9 on the keypad and the next nine
will use the hotkey combination of Ctrl and 1 through 9.
To change the order of the layout presets:
➤ Hold Ctrl and drag the name of the preset to a new location higher or
lower within the menu.
NOTE You must designate or set the default state of a preset. When you select
the Reset to Default option, the preset will return to the state that you have
designated as the default.
Pick List
The Pick List is a convenient way to access frequently used tools and other
elements. You can add tools, views, and compositions to the Pick List. For
example, if you add a Schematic view to the Pick List, then drag and drop it
into a view, a Schematic view opens in that view. This is the same behavior
that occurs when you drag the Schematic view from the Views tab into a view.
Each user has a Pick List. Its contents are independent of any project and are
persistent across sessions.
The Pick List exists as a tab in two locations: the tool UI and through the east
gate of the Gate UI.
Pick List | 141