User`s guide

If you cannot find the host ID, click Lookup to have the utility
automatically locate the host ID for the server(s).
NOTE If your server has more than one network adapter, select the one
that corresponds to a physical network adapter. To determine which
adapters are physical, enter ipconfig /all at a Windows command prompt
and view the Description field above each physical address. If there is
more than one physical network adapter, you can use any one of them,
as long as it was listed when you ran ipconfig /all. Logical devices such
as VPN adapters, PPP adapters, and modems may be listed but are not
usable for licensing.
■ The number of seats for each license server
If you choose a Distributed server model, the Seats box is displayed.
Enter the number of seats for each license server.
Click Next.
4 On the Confirm Server Information page, review the server information
you entered, and click Next.
5 On the Product Registration page, specify the following:
■ Whether the product will be registered to a company or individual.
■ The country or region where the product will be used.
■ Whether the product is an upgrade. If it is, you also need the previous
product’s serial number.
Click Next.
6 Enter your personalization data on the Customer Information page and
choose how you’d like to receive your activation code - email or fax. Click
Next.
7 Review your personalization data on the Confirm Information page and
choose the method you’ll use to submit your request. Your request can
be sent by email, fax or phone.
If you choose Send my request by Email, an email message will display
for you to complete. If you choose to forward your request by fax or
phone, the Contact Autodesk page will display with pertinent contact
information.
You will be sent your activation code by the method you specified on
the Customer Information page.
6 | Chapter 1 Quick Start to Autodesk Network Licensing