2.0

Chapter 7 Creating and Plotting Sheets Using Sheet Manager
828
You can choose only one Code Category per label style. However, you can
define multiple Codes per label style. For example, you can label the horizontal
alignment (the Code Category) with Equation STA Back and Equation STA
Ahead (which are two different Codes). You cannot format a label style to label
the horizontal alignment and profile (both are Code Categories) with station
information.
NOTE
Use the Profile category for labeling the grid elevations on the side of a
profile only. Each specific part of the profile, such as existing ground or
finished ground centerline, has its own unique category.
Instead of being part of the Sections category, each template point code has its
own independent category. This makes it possible to label different variables of
each template point code.
For more information, see Creating Text Labels in Multi-Line Format in this
chapter.
Example: Show Left/Right
Use this scroll box to select whether to show the characters to the left and right
of the station + character. There is an option to Show Full Station, which
displays the entire number. There are also options to Drop Right Side and Drop
Left Side.
For example, if the Preview value is set to 50.02 and the station base value is set
to 100, then a preview of 0+50.02 is displayed with a Show Left/Right setting of
Show Full Station. If you set the Show Left/Right option to Drop Right Side,
then 0 is displayed. A setting of Drop Left Side displays 50.02.
The following illustration shows the Edit Numeric Format dialog box with the
Show Full Station numeric format setting: