2.0

Chapter 7 Creating and Plotting Sheets Using Sheet Manager
826
grade, and static text strings (m @ and %) are combined to produce the
following result: 100m @ 2.25%, as shown:
This example produces a label like the one shown in the following illustration:
Text label
You can use formulas to show alternate units, such as 100.00'[30.480m], or you
can use formulas to change the value of a profile tangent grade from a
percentage to a slope, such as changing 2% to 1 in 50.
You can label multiple codes as one line of information or you can label them
in paragraph form by using special characters.
Example: Code Category
The Code Category list displays the design elements that can be labeled, such as
the horizontal alignment, existing ground, finished ground profile, and pipe
data.