2.0

Laying Out a Plan/Profile Sheet Series
739
To change the sheet layout options
1 From the Sheet Manager menu, choose Plan/Profile Sheets ä Edit Sheet Series.
The Set Current Sheet Series dialog box is displayed and lists the names of the
sheet series that were defined with the Set/Define Series command.
2 Select the sheet series that you want to edit, and then click OK to display the
Edit Sheet Series Data dialog box.
The name of the current series is listed in the Series Name edit box.
3 Review the Alignment/Profile Data section information.
If the wrong alignment, or none at all, is listed, then exit the command and use
the Select Alignment and the Set Current Profile commands to set the current
alignment and profile.
4 Select which sheet style you want the series to use.
5 Click the Set Style button to display the Select Current Sheet Style dialog box.
Use this dialog box to set the sheet style, and then click OK to return to the Edit
Sheet Series Data dialog box.
6 Type the starting sheet number.
The sheets are numbered sequentially starting with the starting sheet number.
When the sheet series is generated, the sheets are automatically saved to the
sheet series folder in the format s001.dwg, s002.dwg, and so on, where 1 is the
starting sheet number.
7 Type the sheet overlap distance.
The sheet overlap distance controls how much each sheet in the series overlaps
the following sheet in the sequence. Enter this distance in model space units
(such as in alignment length units). If you select the Use Fixed Profile Stations
option in the Sheet Manager Preferences dialog box, then the Sheet Overlap
Distance value is the amount of overlap for the profile, not the amount of
overlap for the horizontal alignment.
8 Click OK to save the settings, or Cancel to cancel the command.