2.0

Changing Sheet Manager Preferences
717
Q
Clear the Use Fixed Profile Stations check box to base the sheet series layout
on the length of the alignment that fits within the plan viewport.
When this check box is cleared, the profile stationing does not begin at the
far left of the profile view frame (top frame). The stationing is placed directly
above the stationing in the plan view.
3 Click OK to exit the Settings dialog box.
The following illustration shows a non-fixed profile. As shown, the alignment
stationing in the plan view frame does not line up with the profile stationing:
Non-fixed profile
Drawing Model Space Match Lines
You can place model space match lines along the alignment in plan view to
indicate where the corresponding profile sheet begins and ends.
To draw match lines
1 From the Sheet Manager menu, choose Settings to display the Settings dialog
box.
2 Under Profile Sheet Options, you can select or clear the Draw MS Match Lines
check box:
n
Select the Draw MS Match Lines check box to place match lines along the
alignment in plan view to indicate where the corresponding profile sheet
begins and ends. You can use these match lines to help lay out the plan and
profile sheets. This option is selected by default.
n
Clear the Draw MS Match Lines check box if you do not want match lines
placed along the alignment in plan view.
3 Click OK to exit the Settings dialog box.