2.0

Chapter 6 Working with Pipes
698
Deleting the Finished Draft Profile Layers
To delete the finish draft profile layers
1 From the Pipes menu, choose Finish Draft Profile ä Delete Layer.
2 Do one of the following:
n
Select the pipe run by graphically selecting the run with your pointing device
n
Press ENTER and select the run from the Defined Runs dialog box, then click
OK.
The following prompt is displayed:
Delete Selected Pipe Run <{name}> Layers <Yes>:
3 Enter Yes to delete the selected layers.
The following prompt is displayed:
Erasing entities on layer <{name}> ...
Erasing entities on layer <{name}> ...
done!
NOTE
Because all entities on the run layer are deleted, it is useful when setting up
the layer settings to place each run on a unique layer.
Deleting the Finish Draft Section Layers
To delete the finish draft section pipe run layers
1 From the Pipes menu, choose Finish Draft Sections ä Delete Layer.
2 Do one of the following:
n
Select the pipe run by graphically selecting the run with your pointing device
n
Press ENTER and select the run from the Defined Runs dialog box, then click
OK.
The following prompt is displayed:
Delete Selected Pipe Run <{name}> Layers <Yes>:
3 Enter Yes to delete the layer.
The following prompt is displayed:
Erasing entities on layer <{name}> ...
Erasing entities on layer <{name}> ...
done!
NOTE
Because all entities on the run layer are deleted, it is useful, when setting up
the layer settings, to place each run on a unique layer.