2.0

Editing Conceptual Plan Pipe Runs Using the Pipe Run Editor
685
Deleting Conceptual Pipe Runs in Plan View
Using the Conceptual Plan ä Delete command, you can erase the graphic
entities that comprise a pipe run from the drawing and delete the pipe run data
from the Pipeworks database.
To delete conceptual pipe runs in plan view
1 From the Pipes menu, choose Conceptual Plan ä Delete.
The following prompt is displayed:
Pick run:
2 Do one of the following:
n
Select the run with your pointing device.
n
Press ENTER, select the run from the Defined Runs dialog box, and then click
OK.
The Delete Options for run dialog box is displayed.
3 Select the delete option you want to use.
The Delete Options for run dialog box has the following options/check boxes:
n
Plan: Erases the graphic entities that comprise the conceptual plan pipe run.
The pipe run definition remains in the Pipeworks database.
n
Profile: Erases the graphic entities that comprise the conceptual profile pipe
run. The pipe run definition remains in the Pipeworks database.
n
H Grade: Erases the graphic entities that comprise the hydraulic gradeline.
n
E Grade: Erases the graphic entities that comprise the energy gradeline.
n
.mdb file (All): Erases the graphic entities that comprise the conceptual plan
and profile pipe runs, and deletes the pipe run data from the Pipeworks
database.
NOTE
When you select the .mdb file (All) checkbox, the other options are available
only if there are plan and profile runs and hydraulic and energy gradelines
present in a drawing.
4 Click OK to delete the selected pipe run entities or files.