2.0

Configuring the Grading Appearance Settings
43
NOTE
Some of these settings are only available when you edit an existing
grading object. If you are editing an existing grading object, then the
Grading Scheme Name displays at the top of the dialog box.
2 All of the grading object elements are placed on the same layer. In the Layer list,
select a layer for the grading object.
NOTE
Click the Details button to display a list of layers in the current drawing
and their properties. You can select the layer that you want to use from
this dialog box.
3 Under Colors and Linetypes, select the check boxes next to the components you
want to be visible in the drawing. The footprint must always be visible.
4 In the Color column, specify colors by doing one of the following:
n
Click on a color tile. The Select Color dialog box is displayed. Select a color
for the component and click OK.
n
Type a color number in the right-hand box in the column.
5 In the Linetype column, specify linetypes by doing one of the following:
n
Click in a box to display the Select Linetype dialog box. Select a linetype for
the component and click OK.
n
Type a linetype name in the right-hand box in the column.
6 Under Grip Display, select which grading object grips you want to be visible.
n
Footprint Vertices: controls the visibility of the grips you use to move the
location of a footprint vertex.
n
Target Region Boundaries: controls the visibility of the grips you use to
move a target region boundary and keep it relative to the footprint.