2.0

Chapter 6 Working with Pipes
632
11 Establish the range check settings by selecting the Velocity Check, Slope Check,
or Cover Check check boxes, then enter your new values in the Minimum and
Maximum fields below the selected check boxes.
12 In the Cover section, select either Perpendicular to Pipe or Vertical to verify
whether pipe cover is measured perpendicular to the pipe or vertically.
13 Click OK to exit the dialog boxes.
Changing the Range Check Settings for Pipes
Use the Range Check Settings dialog box to set minimum and maximum values
for pipe flow velocity, pipe slope, and pipe cover. This dialog box also has a
Cover section, with options to verify whether pipe cover is measured
perpendicular or vertical to the pipe.
To change the range check settings for pipes
1 From the Pipes menu, choose Settings ä Edit to display the Pipes Settings Editor
dialog box.
2 In the Editors section, click the Run Editor button to display the Pipes Run
Editor Settings dialog box.
3 Click Range Set to display the Range Check Settings dialog box.