2.0

Calculating Riser Values
535
NOTE
Unlike some other tables that you access in Autodesk Civil Design
calculators, the Riser Table and Riser Pipe Table do not insert values into
the calculator itself. The values in the table are used only by the Riser
Calculator to solve for the optimum riser configuration.
To customize riser diameter and pipe diameter tables
1 In the Riser Calculator dialog box, click Tables to display the Table Selection
dialog box.
2 To customize the riser diameter table, click Riser Table.
If you want to customize the pipe diameter table, click Pipe Table to display the
Riser Diameters or the Riser Pipe Diameters dialog boxes.
3 You can delete or add a diameter:
If you want to}
Then
delete a diameter from the table place your cursor in the row for the
diameter you want to remove, and then
click Delete.
add a diameter to the table place your cursor in the row above which
you want to insert a row, and then click
Insert.
4 Click OK to return to the Riser Calculator dialog box.
Saving Riser Data from the Riser Calculator
In the Riser Calculator dialog box, you can click Save to save riser data into the
c:\Land Projects R2\<project name>\hd folder as an .rsr file.
To save riser data from the riser calculator dialog box
1 In the Riser Calculator dialog box, click Save to display the Save Riser File dialog
box.
2 In the File name box, type a name for the file and click Save. The data is saved
with an .rsr file extension in the c:\Land Projects R2\<project name>\hd folder.
The Riser Calculator dialog box displays.
3 Click OK to exit the dialog box.