2.0

Chapter 5 Working with Hydrology Commands
486
You can add entrance loss coefficients to the table by using the following
guidelines:
n
Click Insert to add a new row above the row you currently have selected.
n
To add data, select an empty text box and type the new description and
coefficient.
3 Click OK to return to the Culvert Settings dialog box.
Specifying the Inlet Control Type
From the Inlet Control Types dialog box, you can select an inlet control for the
culvert, such as headwalls or wingwalls.
To specify the inlet control type
1 In the Culvert Settings dialog box, click the Select button next to the Design
Type field to display the Inlet Control Types dialog box.
2 Select a type by placing your cursor in the appropriate column and clicking
anywhere in the text box that contains the type you want to use.
NOTE
Only the indented descriptions are available for selection. Descriptions are
not highlighted when selected, but the cursor flashes on the currently
selected row.
Use the navigation buttons on the right side of the dialog box to move through
the list of descriptions and coefficients.
3 Click OK to return to the Culvert Settings dialog box.