2.0

Chapter 4 Working with Cross Sections
432
5 Specify the insertion options:
If you
}
Then
}
want to change the rotation angle
of the label
type
Rotation
.
For more information, see Labelling the Offset of
the Cross Section Points Manually in this chapter.
want to change the label leader
type
Leader
.
For more information, see Labelling the Offset of
the Cross Section Points Manually in this chapter.
do not want to specify these options go to step 6.
6 Pick a point for the Second leader point. The command prompt asks for the
Next point.
7 Press ENTER when you have chosen all the points you want to make up the
leader, and the label is placed.
8 Select additional points, or press ENTER to end the command.
Labeling a Selected Area on a Cross Section
To label an area on a plotted cross section
1 From the Cross Sections menu, choose Section Utilities ä Label Area. The
command lists the starting and ending stations and the current section.
The following prompt is displayed:
Text rotation angle <0d’0”>:
2 Enter the rotation angle for the area label. The following prompt is displayed:
AREA first point:
3 Select the points that define the area to be labeled. The command continues to
prompt for area points.
4 Press ENTER when all the points defining the area have been selected. The
following prompt is displayed:
Insert point (Rotation/Leader):
5 Specify the insertion options:
If you
}
Then
}
want to change the rotation angle of
the label
type
Rotation
.
For more information, see Labelling the Offset
of the Cross Section Points Manually in this
chapter.
want to change the label leader
type
Leader
.
For more information, see Labelling the Offset
of the Cross Section Points Manually in this
chapter.
do not want to specify these options go to step 6.