2.0

Chapter 4 Working with Cross Sections
366
All of the superelevation method names and brief descriptions of each are listed.
3 Click OK to return to the Superelevation Control dialog box
Outputting the Superelevation Data
To ouput the superelevation data
1 From the Cross Sections menu, choose Design Control ä Superelevation
Parameters to display the Superelevation Control dialog box.
2 Click Output to generate the report.
The command prompts for the output file name.
3 Accept the default output file name, or enter a new name. This file is located in
the current project folder.
The command prints the report to the file and the Superelevation Control
dialog box is redisplayed.
4 Click OK to exit the command.
Processing the Cross Sections for a Range of
Stations
You can use the Process Sections command if youve made changes to the
depth, stepped, and surface slope control editor files. The Process Sections
command is also useful if youve made changes outside of the Edit Design
Control command, such as editing the vertical alignment with Profile
commands, editing the template definition using the Edit Template command,
or re-sampling the existing ground sections.
To process the cross sections for a range of stations
1 From the Cross Sections menu, choose Design Control ä Process Sections to
display the Enter Station Range dialog box.