2.0

Chapter 2 Working with Ponds
128
The following illustration shows an example of the Conic Method for pond
volumes:
Conic method for pond volumes
Reporting the Pond Contour Data By Selecting
the Pond Contours
Use the Pond Output ä Output Editor by Contours command to create a text
output file that contains data for each contour in a pond. You can choose
which data you want to output, including elevation, area, and volume
information.
NOTE
This command is the same as the Output Editor by Pond command except
that you select the pond contours to reach the Output Editor.
To report data about each pond contour
1
From the Hydrology menu, choose Pond Output ä Output Editor By Contours.
The following prompt is displayed:
Select by Layer (Selection/Layer):
2
Do one of the following to select the contours:
n
Type Selection, press ENTER, and then select the contours.
n
Type Layer, and then select a contour on the layer you want to select. Or,
you can press ENTER (instead of selecting a contour), and then type the
name of the layer to select. Be sure there are no other ponds with contours
on the same layer you select.
The Pond Output Editor dialog box is displayed.
The information at the top of the dialog box displays the data as it appears in
the output file. The other options determine how the pond data appears.