2.0

Chapter 2 Working with Ponds
126
The Pond Output Editor dialog box is displayed.
The information at the top of the dialog box displays the data as it will appear
in the output file.
3 To specify how the data is separated in the output file, select one of the
following Delimiter options:
If you want to} Then select}
separate the data with commas (,) Comma.
separate the data with spaces ( ) Space.
separate that data in columns based on
the width values specified in the Field
settings in this dialog box
Column.
4 To include a header in the output file, select the Header check box.
The following is an example of a header:
#Units=Elevation,m,Area,ha,Volume,m3,Volume,m3
# Elev Area Cumml Avg Cumml Conic
# m ha m3 m3
5 To determine the data order, column width, and decimal precision used for the
columns in the output file, use the following Field settings:
n
14: The field number determines the order in which the data appears. For
example, the field you select from the list next to the number 1 appears in
the first column, the field you select from the list next to the number 2
appears in the second column, and so on. You can specify up to four fields.
n
Field Lists: Select the type of pond data you want in each field (14).
n
Width: Enter a width, up to 25 characters, for each field.
n
Prec: Enter the decimal precision, up to eight places, for each field.