2.0

Chapter 2 Working with Ponds
110
3 Calculate the pond bottom from the selected vertex:
If you want to} Then type}
define the pond bottom by specifying
a depth
depth
, and then type the required
pond depth.
define the pond bottom by specifying
the bottom elevation
elevation
, and then type the
elevation of the pond bottom.
define the pond bottom by
daylighting down to a TIN surface
daylight
.
return to the previous set of prompts eXit
.
The following prompt is displayed:
eXit/End/Next/Previous <Next>:
4 Move to the subsequent vertex you want to transition by using the Next or
Previous option.
5 Repeat until you have reached the vertex where you want to end the transition
region.
6 Type End to end the transition region.
7 Define the slope and depth/elevation/daylight for the end vertex.
8 Use the eXit option to return to the previous command line prompts.
Resetting the Pond Pattern Settings
Use the Reset Patterns command to remove any existing pattern data from the
vertices on the pond perimeter you select.
To reset the pattern settings for a pond
1 From the Grading menu, choose Pond Slopes ä Reset Patterns.
The following prompt is displayed:
Select polyline:
2 Select the pond perimeter.
The following prompt is displayed:
All/Multiple/Individual/eXit/Previous/Next <Next>:
3 Use the Next or Previous options to move to the vertex you want to remove
pattern data from (unless you want to use the All option).