2.0

Changing the Pond Settings
89
either at the end of one of the Pond Slopes commands, or by using the Shape
Pond commands.
Slope control lines act as breaklines. You can create a surface from a pond and
use the slope control lines as breakline data, along with the pond contour data.
Then you can paste the pond into your existing ground surface model.
NOTE
Slope control lines are drawn as heavyweight polylines in the drawing.
To change the slope control line settings for ponds
1 From the Grading menu, choose Pond Settings ä Slope Control Lines to display
the Pond Slope Control Settings dialog box.
2 In the Layer box, type the name of the layer on which the slope control lines
will be drawn or accept the default.
3 In the Breakline color box, type a color number for the layer on which the slope
control lines will be drawn, or click the colored tile and select a color from the
standard Select Color dialog box.
4 Under Breakline type, specify how the vertices of the slope control lines are
created:
If you want to} Then}
create the vertices of the slope control
lines where the slope control lines cross
the normal contour lines
select Normal contours.
create the vertices of the slope control
lines where the slope control lines cross
the highlighted contour lines
select Highlighted contours.
create the vertices of the slope control
lines where the slope changes in the
pond bank
select Slope changes.
These options allow for vertices to be placed on the slope control lines where
they cross either a normal contour, a highlighted contour, or only at slope
changes in the pond banks.