User manual

Table Of Contents

also be accessed through Site Administration ➤ Limits tab ➤ Edit Defaults

➤ Select Site Members.

1 In the Site Members list at the top of the dialog box, select a member or

group name and click the Add button.

2 If the member you want to add is not listed, select All site members

from the Show drop-down list box at the top of the window. If the

member is still not available, you will have to ask the site administrator

to create the member. Or, if you have the ability to create new members

or groups, the New Site Group and New Site Member toolbar buttons

are enabled. Click either button to add a member or a group. The member

appears in the Selected list in the lower half of the dialog box.

3 From the Permission list, choose a permission level for the user or group.

(The ability to select a permission level is not available when selecting

members in the Site Administration Limits tab.)

NOTE If you are adding multiple members or groups to the project then

the permission that you choose here applies to all members or groups being

added. If you want each member to have a separate permission level you

have to specify that in the Members tab.

4 Click OK to add the members and groups to the Project Members list.

All newly added members and groups appear in the Members tab.