User manual

To view a drawing:
1 In the tree view (or details view), select the drawing file you want to
view.
2 In the details view, click the View tab.
NOTE To make sure that external reference paths are resolved, click the Check
External References button.
If the selected drawing(s) are not on your site, they may still be found on your
local file system depending on how your Xrefs were assembled. If Xrefs can't
be found using the path information provided but they reside in the same
directory, they are located and loaded (resolved). This is consistent with the
way AutoCAD works. The External References button displays information
about files that have been uploaded to your site only.
To view a versioned drawing:
1 In the tree view, select the file you want to view. The file information is
displayed in the details view.
2 At the top of the details view, click the Versions tab.
3 Right-click a version choose View.
NOTE When you click View in Window, the selected file information is displayed
in the details view in a separate window. You also have access to all the tabbed
options in case you want to select from the other tabbed information. You can
then navigate to your site, open any other file, and view a variety of details about
two files at the same time.
To view a drawing in a separate window:
1 Select a drawing in the project tree.
2 Click the View tab.
3 Click the View in Window button.
206 | Chapter 9 Files