User manual

local computer. You must have Admin, Edit, or Review permission to create
markups.
The number of markups associated with the original drawing is noted on the
Markups tab. However, the number only refers to the markups that are
associated with the drawing. If you save a markup as a separate file (either to
your site or your local hard drive) that markup is not included in the number
on the markups tab.
To compare two drawings:
1 Within the project tree select one or more drawings.
2 Right-click and select Compare DWFs. The Compare DWFs dialog box
is displayed.
3 The name of the file you selected in the project tree is displayed in the
field, File 1. If you want to select a different file click the Browse button
and navigate to the desired file.
4 Select the sheet to be used in the comparison.
5 Under File 2, click the Browse button and select Browse project
folders to select a second file. Alternatively you can select Browse
local files to select a file for comparison from your local hard drive.
6 Select the sheet for to be used in the comparison.
7 Click OK. The selected sheets are displayed in Autodesk Design Review
for comparison.
To compare two versions of the same drawing:
1 Within the project tree select a drawing.
2 Navigate to the Versions tab.
3 Click the Compare DWFs button. The Compare DWFs dialog box is
displayed.
4 Under Version 1 select a version.
5 Select a sheet.
6 Under Version 2 select a second version and then select a sheet.
7 Click OK. The selected sheets are displayed in Autodesk Design Review
for comparison.
Files | 175