Technical data

Creating an Assembly Drawing

Next, you will create an assembly drawing of the entire jogging stroller. For the purposes of this test drive, we

have provided you with the final assembly, including the finished clamp and the rim.

Opening the Jogging Stroller Assembly

The finished versions of the part and assembly files for the stroller are located in a separate folder on your

system. A project file has been provided in this folder to simplify the process of creating the assembly

drawings.

• Before you continue with this section, close any Autodesk Inventor files that may be open.

To open the project for the finished stroller:

1. From the File menu, choose Projects.

2. In the project window of the Open dialog box, right-click

and choose Browse.

3. Navigate to the Kangoo515 folder, select

Jogger_complete.ipj, and then click Open.

4. In the project window, double-click Jogger_complete to

make the project active.

To open the finished jogging stroller assembly:

1. In the What to Do column on the left side of the

dialog box, click Open .

2. Click Files of Type and select Assembly Files

(*.iam).

3. From the list of assembly files, select

Kangoo515.iam and click Open.

Note: If a dialog box prompts you to update, click

Ye s .

The finished version of the jogging stroller is

displayed.

4. Use the Pan , Zoom , and Rotate tools

to examine the assembly.

INV8_TD_Book5.book Page 67 Tuesday, October 28, 2003 10:51 AM