2012

Table Of Contents
Enter d (Decurve) to remove extra vertices inserted by a fit or spline
curve and to straighten all segments of the polyline.
Enter L (Ltype Gen) to generate the linetype in a continuous pattern
through the vertices of the polyline.
Enter r (Reverse) to reverse the order of vertices of the polyline.
Enter u (Undo) to reverse actions back to the start of PEDIT.
5 Enter x (Exit) to end a command option. Press Enter to exit the PEDIT
command.
To reverse lines, polylines, splines, or helixes
1 Click Home tab Modify panel Reverse.
2 Select a line, polyline, spline, or helix to reverse.
3 Press Enter to end the command.
To join polylines, splines, lines, and arcs into a single polyline
1 Click Home tab Modify panel Edit Polyline.
2 Select a polyline, spline, line, or arc to edit. If you selected a spline, line,
or arc, press Enter to convert the selected object into a polyline.
3 Enter j (Join).
4 Select one or more polylines, splines, lines, or arcs that are located end
to end.
Each selected polyline, spline, line, or arc is now joined into a single
polyline.
5 Press Enter to end the command.
To delete a vertex in a polyline
1 Click Home tab Modify panel Edit Polyline.
2 Select a polyline.
3 Enter e (Edit vertex).
850 | Chapter 19 Select and Modify Objects