2012

To chamfer two nonparallel line segments
1 Click Home tab ➤ Modify panel ➤ Chamfer.
2 Select the first line.
3 Select the second line.
To chamfer by specifying chamfer length and angle
1 Click Home tab ➤ Modify panel ➤ Chamfer.
2 Enter a (Angle).
3 Enter the distance from the corner to be chamfered along the first line.
4 Enter the chamfer angle.
5 Select the first line. Then select the second line.
To chamfer without trimming
1 Click Home tab ➤ Modify panel ➤ Chamfer.
2 Enter t (Trim Control).
3 Enter n (No Trim).
4 Select the objects to chamfer.
To chamfer an entire polyline
1 Click Home tab ➤ Modify panel ➤ Chamfer.
2 Enter p (Polyline).
3 Select the polyline.
The polyline is chamfered using the current chamfer method and the
default distances.
Fillet, Chamfer, Break, or Join Objects | 841