2012

Table Of Contents
Modify Leaders Using Grips on page 1449
Modify Dimension Geometry on page 1593
Work with Dynamic Blocks in Drawings on page 922
To turn on grips
1 At the Command prompt, enter options.
2 In the Options dialog box, Selection tab, select Show Grips.
3 Click OK.
To edit objects using grips
1 Select the objects to edit.
2 Do one or more of the following:
Select and move grips to stretch the object.
NOTE In the case of some object grips, for example, block reference
grips, stretch will move the object rather than stretch it.
Press Enter or Spacebar to cycle to the move, rotate, scale, or mirror grip
modes, or right-click the selected grip to view a shortcut menu with
all available grip modes and other options.
Hover over a grip to view and access the multi-functional grip menu
(if available), and press Ctrl to cycle through the available options.
3 Move the pointing device and click.
TIP To copy the object, press and hold Ctrl until you have clicked to reposition
the grip.
To stretch multiple objects using grips
1 Select several objects to stretch.
2 Hold down Shift and click several grips so that they are highlighted.
3 Release Shift and select a grip as the base grip by clicking the grip.
4 Move the pointing device and click.
780 | Chapter 19 Select and Modify Objects