2012

You can hold down Ctrl to select several linetypes or SHIFT to select a
range of linetypes.
4 Click OK.
To list the linetypes loaded in the current drawing
1 Click Home tab ➤ Properties panel ➤ Linetype.
2 Click anywhere outside the box to close it.
To list the linetypes in a linetype definition file
1 Click Home tab ➤ Properties panel ➤ Linetype.
2 In the Linetype drop-down list, click Other. Then, in the Linetype
Manager dialog box, click Load.
3 In the Load or Reload Linetypes dialog box, click File.
4 In the Select Linetype File dialog box, select an LIN (linetype definition)
file whose linetypes you want to lit. Click Open.
The dialog box displays the linetype definitions stored in the selected
LIN file.
5 In the Load or Reload Linetypes dialog box, click Cancel.
6 Click Cancel to close the Linetype Manager.
To unload an unused linetype
1 Click Home tab ➤ Properties panel ➤ Linetype.
2 In the Linetype drop-down list, click Other. Then, in the Linetype
Manager dialog box, select a linetype. Click Delete.
The selected linetype is unloaded. Certain linetypes cannot be unloaded:
BYLAYER, BYBLOCK, CONTINUOUS, and any linetypes currently in use.
566 | Chapter 16 Control the Properties of Objects