2012

To view an adjacent face
NOTE Make sure a face view is current.
■ Click one of the triangles displayed near the edges of the ViewCube tool.
To interactively reorient the view
■ Click the ViewCube tool, hold down the left mouse button, and drag in
the direction that you want to orbit the model.
To use animated transitions when reorienting a view to a preset orientation
1 Click View tab ➤ Windows panel ➤ User Interface drop down ➤
ViewCube.
2 Right-click the ViewCube tool, and click ViewCube Settings.
3 In the ViewCube Settings dialog box, under When Clicking on the
ViewCube, select Use View Transitions when Switching Views.
Transitions from one view to another appear animated when you click
a predefined area on the ViewCube tool.
4 Click OK.
To automatically fit the model after a view orientation
1 Click View tab ➤ Windows panel ➤ User Interface drop down ➤
ViewCube.
2 Right-click the ViewCube tool, and click ViewCube Settings.
3 In the ViewCube Settings dialog box, under When Clicking on the
ViewCube, click Zoom to Extents After View Change.
Clicking a predefined area of the ViewCube tool reorients the model and
fits the model to the window.
4 Click OK.
342 | Chapter 11 Use Viewing Tools