2012

Table Of Contents
NOTE The Animations panel is hidden by default. To display the Animations panel:
In 3D Modeling workspace, click the Render tab, then right-click and choose Show
Panels, and then click Animations.
To start walk mode
Click Render tab Animations panel Walk and Fly drop-down
Walk.
To start fly mode
Click Render tab Animations panel Walk and Fly drop-down
Fly.
To specify Walk or Fly settings
1 Click Render tab Animations panel Walk and Fly drop-down
Walk and Fly Settings.
2 In the Walk and Fly Settings dialog box, under Settings, click the button
next to a display option.
3 In the Display Position Locator Window option, clear the check box if
you do not want to display the window.
NOTE If performance slows when this window is displayed, you may want
to close the Position Locator window.
4 In the Current Drawing Settings section, under Walk/Fly Step Size, enter
a number to set the step size in drawing units.
5 In the Steps Per Second option, enter a number between 1 and 30.
6 Click OK.
330 | Chapter 11 Use Viewing Tools