2012

Table Of Contents
To save and name a view
1 Do one of the following:
If you have more than one viewport in model space, click inside the
viewport that contains the view you want to save.
If you are working in a layout, select the viewport.
2 Click View tab Views panel View Manager.
3 In the View Manager, click New.
4 In the New View dialog box, View Name box, enter a name for the view.
If the drawing is part of a sheet set, the view categories for the sheet set
are listed. You can add a category or select one from the list.
5 In the Boundary section, select one of the following options to define
the area of the view:
Current Display. Includes all of the drawing that is currently visible.
Define Window. Saves part of the current display. The dialog box
closes while you use the pointing device in the drawing to specify
opposite corners of the view. To redefine the window, click the Define
View Window button.
6 Click OK twice to save the new view.
To restore a saved view
1 Do one of the following:
If you have more than one viewport in model space, click inside the
viewport that contains the view you want to restore.
If you are working in a layout, select the viewport.
2 Click View tab Views panel View Manager.
3 In the View Manager, Views list, select the view that you want to restore.
4 Click Set Current. Click OK.
282 | Chapter 10 Change Views